Outside Perimeters

From MatterControl Manual
Jump to: navigation, search

Merge

Migrating: For MatterControl 2.0 the MatterControl documentation is moving to matterhackers.com/mattercontrol/support/.
This page is in the process of being migrated. It's new home will be matterhackers.com/mattercontrol/support/slice-settings/filament/advanced#outside-perimeters.

A screenshot of the Outside Perimeters setting as seen in MatterControl's SETTINGS pane.

Function

A modifier of the width of the extrusion when printing outside perimeters.

Can be useful to fine-adjust actual print size when objects print larger or smaller than specified in the digital model.

Parameters

  • millimeters (mm)
  • percent (%)

Set to 0 to use default extrusion width.

Example(s)

mm

In this example, the adjusted nozzle diameter for the first layer extrusion will be 0.3 mm.

Outside Perimeters-ss-ex.png

%

In this example, the nozzle size set under Printer settings will be modified by 90%. For this example, the nozzle size was 0.5 mm, so the adjusted size will be 0.45 mm.

Outside Perimeters-ss-ex1.png