Z Lift
From MatterControl Manual
< SETTINGS | Filament | Retraction | While Printing(Redirected from Settings/Filament/Retraction/While Printing/Z Lift)
|
Migrating: For MatterControl 2.0 the MatterControl documentation is moving to matterhackers.com/mattercontrol/support/. |
Function
The distance the nozzle will be lifted during non-printing moves (after each retraction happens). This ensures that the nozzle will not be dragged across the top of the object.
Parameters
- millimeters (mm)
Can be zero.
Example(s)
mm
In this example, the nozzle will lift 1 mm after every retraction.