2,552
edits
Changes
Created page with "{{Slice Settings |A modifier of the width of the extrusion when printing outside perimeters. Can be useful to..."
{{Slice Settings
|A modifier of the [[Slice Settings/Printer/Extruder/Extruder X/Nozzle Diameter|width of the extrusion]] when printing outside perimeters.
Can be useful to fine-adjust actual print size when objects print larger or smaller than specified in the digital model.|*millimeters (mm)
*percent (%)
Set to 0 to use [[Slice Settings/Printer/Extruder/Extruder X/Nozzle Diameter|default extrusion width]].|
=== mm ===
In this example, the adjusted nozzle diameter for the first layer extrusion will be .3 mm.}}
=== % ===
In this example, the [[Slice Settings/Printer/Extruder/Extruder X/Nozzle Diameter|nozzle size set under Printer settings]] will be modified by 90%. For this example, the nozzle size was 0.4 mm, so the adjusted size will be 0.44 mm.
[[File:{{SUBPAGENAME}}-ss-ex1.png]]
|A modifier of the [[Slice Settings/Printer/Extruder/Extruder X/Nozzle Diameter|width of the extrusion]] when printing outside perimeters.
Can be useful to fine-adjust actual print size when objects print larger or smaller than specified in the digital model.|*millimeters (mm)
*percent (%)
Set to 0 to use [[Slice Settings/Printer/Extruder/Extruder X/Nozzle Diameter|default extrusion width]].|
=== mm ===
In this example, the adjusted nozzle diameter for the first layer extrusion will be .3 mm.}}
=== % ===
In this example, the [[Slice Settings/Printer/Extruder/Extruder X/Nozzle Diameter|nozzle size set under Printer settings]] will be modified by 90%. For this example, the nozzle size was 0.4 mm, so the adjusted size will be 0.44 mm.
[[File:{{SUBPAGENAME}}-ss-ex1.png]]
