2,552
edits
Changes
no edit summary
{{Slice Settings
|The minimum speed to which the printer will reduce in order to attempt to make the layer print time long enough to satisfy the [[Slice Settings/Filament/Cooling/Cooling Thresholds/Slow Down If Layer Print Time Is Below|minimum layer time]].|*millimeters per second (mm/s) == [[Custom GCode Variables|Custom GCode Variable]] == <code>min_print_speed</code>|
=== mm/s ===
In this example, the printer will print at no less than 5 mm/s if required to slow down in order to attempt to satisfy the [[Slice Settings/Filament/Cooling/Cooling Thresholds/Slow Down If Layer Print Time Is Below|minimum layer time]].}}
