2,552
edits
Changes
no edit summary
|G-Code to be run when the print [[Resume button|resumes]] after a pause.|*G-Code
*[[Custom_G-Code_Variables|Custom G-Code variables]]
=== G-Code ===
In this example, when the 'Resume' button is pressed after the print has been paused, the printer will set coordinates relative to the current position (G91), then move 10 mm down and extrude 10.8 mm of filament at a rate of 12,000 mm/minute (G1 Z-10 E10.8 F12000), then set coordinates to absolute positioning again (G90).}}
