Changes

|The number of layers, or the distance, to skip between the support (including [[Settings/General/Support Material/Support Options/Interface Layers|interface layers]]) and the model. Add mm For PLA and ABS a value between 0.1 and 0.3 generally works well. In MatterControl 1.5, [[Settings/General/Support_Material/Support_Options/Air_Gap&oldid=1895|Z Gap]] was changed to the end Air Gap. Z Gap only worked in increments of the number to specify layer height. Air Gap can be any distance.|*layer count (layers)*millimeters (mm)

For these examplesthis example, [http://104wiki.154mattercontrol.32.252com/images/7/72/Support_test.stl Support_test.stl] is the model used. === layers === In this example, the distance between the top of the support material and the bottom of the model is three layers (which for this model the layer height is 0.2 mm), so 0.6 mm total.}}

In this example, the distance between the top of the support material and the bottom of the model is 0.2 mm. [[File:{{SUBPAGENAME}}-ss-ex1.png]]