View source for OPTIONS/Software Print Leveling

{{DISPLAYTITLE:Software Print Leveling}}[[File:SPL7.png|right|framed|<center>The Software Print Leveling section as shown in the '''Options''' menu.</center>]]The Software Print Leveling feature of MatterControl compensates for an uneven bed. It is a form of [[Automatic Print Leveling]]. Measurement is taken of the bed as it is, then G-Code is adjusted as the print happens. The G-Code itself is not changed, but rather a filter is applied, making adjustments on-the-fly. For this reason, existing .gcode files can be printed using MatterControl with Software Print Leveling applied.
<br clear=all>
== Enable/Disable ==

[[File:SPL.gif|right]]
Click the slider to the right to enable or disable Software Print Leveling. An icon will appear next to the extruder temperature indicator if leveling is enabled.
<br clear=all>
== Edit Data ==

Click the pencil icon ([[File:Pencil-edit.png]]) to edit existing leveling data.

[[File:SPL8.png]]

<br clear=all>
== Wizard ==

Based on the [[SETTINGS/Printer/Print Leveling/Machine Settings/Leveling Solution|leveling solution]] specified in slice settings, the printer will run through a 3-, 7-, or 13-point configuration wizard to sense the shape and orientation of the print bed.

{| class="wikitable" style="margin: auto;"
|-
| [[File:SPL1.png]]  || [[File:SPL2.png]]
|-
| colspan="2" |<center>First, the wizard explains the basic process and tells the user to get a piece of paper.</center>
|}
<br>
{| class="wikitable" style="margin: auto;"
|-
| [[File:SPL3.png]]  || [[File:SPL4.png]] 
|-
| colspan="2" | <center>[[File:SPL5.png]]</center>
|-
| colspan="2" |<center>At each point, the wizard has the user test the height at low, medium, and high precision.</center>
|}
<br>
{| class="wikitable" style="margin: auto;"
|-
| [[File:SPL6.png]]
|-
| When all point have been measured, the wizard is complete.
|}

[[Category:Options]]