View source for SETTINGS/Filament/Extrusion/Extrusion Width/First Layer

{{Migrated|slice-settings/filament/advanced#first-layer}}
{{Slice Settings

|A modifier of the [[Settings/Printer/Extruder/Extruder X/Nozzle Diameter|width of the extrusion]] for the first layer of the print. 

A value greater than 100% can help with adhesion to the print bed.|*millimeters (mm) 
*percent (%)

Set to 0 to use [[Settings/Printer/Extruder/Extruder X/Nozzle Diameter|default extrusion width]].|

=== mm ===

In this example, the adjusted nozzle diameter for the first layer extrusion will be 0.5 mm.}}

=== % ===

In this example, the [[Settings/Printer/Extruder/Extruder X/Nozzle Diameter|nozzle diameter set under Printer settings]] will be modified by 110%. For this example, the nozzle size was 0.4 mm, so the adjusted size will be 0.44 mm.

[[File:{{SUBPAGENAME}}-ss-ex1.png]]