Difference between revisions of "SETTINGS/Filament/Temperatures/Extruder Temperatures/Extruder Temperature"
From MatterControl Manual
< SETTINGS | Filament | Temperatures | Extruder Temperatures
(Created page with "{{Slice Settings |The target temperature the extruder will attempt to reach during the print. This temperature can be adjusted during a print by changing the value in the [...") |
(No difference)
|
Revision as of 16:22, 23 December 2015
Function
The target temperature the extruder will attempt to reach during the print.
This temperature can be adjusted during a print by changing the value in the Extruder Temperature Target field.
Parameters
- degrees Celsius
Example(s)
degrees
In this example, the extruder will attempt to reach 218 for the duration of the print.
