Difference between revisions of "SETTINGS/General/Speed"

Revision as of 16:36, 23 December 2015

The Speed sub-category as shown in the MatterControl SETTINGS pane.

Speed is a sub-category of General settings which deal with the speed at which specific sections of the model will print.

Slice_Settings/General/Speed/Speed_for_Infill has no subpages to list.

Slice_Settings/General/Speed/Speed_for_Perimeters has no subpages to list.

Slice_Settings/General/Speed/Speed_for_Other_Printing has no subpages to list.

Slice_Settings/General/Speed/Speed_for_Non-Print_Moves has no subpages to list.

Slice_Settings/General/Speed/Modifiers has no subpages to list.

@@ Line 3: / Line 3: @@
 == Sub-sections ==
-=== Speed for Infill ===
+=== [[Slice_Settings/General/Speed/Speed_for_Infill|Speed for Infill]] ===
 <splist parent = Slice_Settings/General/Speed/Speed_for_Infill />
-=== Speed for Perimeters ===
+=== [[Slice_Settings/General/Speed/Speed_for_Perimeters|Speed for Perimeters]] ===
 <splist parent = Slice_Settings/General/Speed/Speed_for_Perimeters />
-=== Speed for Other Printing ===
+=== [[Slice_Settings/General/Speed/Speed_for_Other_Printing|Speed for Other Printing]] ===
 <splist parent = Slice_Settings/General/Speed/Speed_for_Other_Printing />
-=== Speed for Non-Print Moves ===
+=== [[Slice_Settings/General/Speed/Speed_for_Non-Print_Moves|Speed for Non-Print Moves]] ===
 <splist parent = Slice_Settings/General/Speed/Speed_for_Non-Print_Moves />
-=== Modifiers ===
+=== [[Slice_Settings/General/Speed/Modifiers|Modifiers]] ===
 <splist parent = Slice_Settings/General/Speed/Modifiers />