Difference between revisions of "SETTINGS/Filament/Temperatures/Bed Temperatures/Bed Temperature"
From MatterControl Manual
< SETTINGS | Filament | Temperatures | Bed Temperatures
(Created page with "{{Slice Settings |The temperature to which the bed will be set for the duration of the print. Set to 0 to disable.|*degrees Celsius| === degrees === In this example, the be...") |
(No difference)
|
Revision as of 17:02, 29 December 2015
Function
The temperature to which the bed will be set for the duration of the print. Set to 0 to disable.
Parameters
- degrees Celsius
Example(s)
degrees
In this example, the bed will be set to 50 degrees Celsius for the print.
