Difference between revisions of "SETTINGS/Filament/Retraction/While Printing/Length on Move"
From MatterControl Manual
< SETTINGS | Filament | Retraction | While Printing
(Created page with "{{Slice Settings |The distance filament will reverse before each qualifying non-print move...") |
(No difference)
|
Revision as of 14:07, 30 December 2015
Function
The distance filament will reverse before each qualifying non-print move.
Parameters
- millimeters (mm)
Example(s)
mm
In this example, filament will reverse 6.8 mm before travelling 20 mm or more.
