Difference between revisions of "SETTINGS/Filament/Retraction/While Printing/Minimum Extrusion Requiring Retraction"
From MatterControl Manual
< SETTINGS | Filament | Retraction | While Printing
(Created page with "{{Slice Settings |The minimum length of filament that must be extruded before a retraction can occur.|*millimeters (mm) Can be zero.| === mm === In this example, 1.5 mm of...") |
(No difference)
|
Revision as of 15:02, 30 December 2015
Function
The minimum length of filament that must be extruded before a retraction can occur.
Parameters
- millimeters (mm)
Can be zero.
Example(s)
mm
In this example, 1.5 mm of filament must be extruded before a retraction can occur.
