Difference between revisions of "SETTINGS/Filament/Extrusion/Extrusion Width/Outside Perimeters"

Revision as of 11:50, 31 December 2015

A screenshot of the Outside Perimeters setting as seen in MatterControl's SETTINGS pane.

Function

A modifier of the width of the extrusion when printing outside perimeters.

Can be useful to fine-adjust actual print size when objects print larger or smaller than specified in the digital model.

Parameters

• millimeters (mm)
• percent (%)

Set to 0 to use default extrusion width.

Example(s)

mm

In this example, the adjusted nozzle diameter for the first layer extrusion will be .3 mm.

%

In this example, the nozzle size set under Printer settings will be modified by 90%. For this example, the nozzle size was 0.4 mm, so the adjusted size will be 0.44 mm.