Difference between revisions of "SETTINGS/Filament/Cooling/Cooling Thresholds/Slow Down If Layer Print Time Is Below"

From MatterControl Manual
Jump to: navigation, search
(Created page with "{{Slice Settings |The minimum amount of time a layer must take to print. If a layer will take less than this amount of time, the movement speed is reduced so the layer print...")
(No difference)

Revision as of 12:49, 31 December 2015

A screenshot of the Slow Down If Layer Print Time Is Below setting as seen in MatterControl's SETTINGS pane.

Function

The minimum amount of time a layer must take to print. If a layer will take less than this amount of time, the movement speed is reduced so the layer print time will match this value, down to the minimum print speed at the slowest.

Parameters

  • seconds

Example(s)

seconds

In this example, if a layer will take less than 40 seconds to print, print speed will be slowed to attempt to have the layer take this long to print.

Slow Down If Layer Print Time Is Below-ss-ex.png
Retrieved from "http://wiki.mattercontrol.com/index.php?title=SETTINGS/Filament/Cooling/Cooling_Thresholds/Slow_Down_If_Layer_Print_Time_Is_Below&oldid=1166"