Difference between revisions of "SETTINGS/General/Speed/Speed for Perimeters/Inside Perimeters"
From MatterControl Manual
< SETTINGS | General | Speed | Speed for Perimeters
| Line 1: | Line 1: | ||
{{Slice Settings | {{Slice Settings | ||
| − | |The speed at which inside perimeters will print.|*millimeters per second (mm/s)| | + | |The speed at which inside perimeters will print.|*millimeters per second (mm/s) |
| + | |||
| + | == [[Custom GCode Variables|Custom GCode Variable]] == | ||
| + | |||
| + | <code>perimeter_speed</code>| | ||
=== mm/s === | === mm/s === | ||
In this case, the inside perimeters will be printed at 40 mm/s.}} | In this case, the inside perimeters will be printed at 40 mm/s.}} | ||
Revision as of 10:42, 13 January 2016
Function
The speed at which inside perimeters will print.
Parameters
- millimeters per second (mm/s)
Custom GCode Variable
perimeter_speed
Example(s)
mm/s
In this case, the inside perimeters will be printed at 40 mm/s.
