Difference between revisions of "SETTINGS/Filament/Retraction/While Printing/Wipe After Retract"
From MatterControl Manual
< SETTINGS | Filament | Retraction | While Printing
m (MatterHackers moved page Slice Settings/Filament/Filament/Retraction/Wipe After Retract to Settings/Filament/Filament/Retraction/Wipe After Retract) |
|
(No difference)
|
Revision as of 13:54, 20 January 2016
Function
The extruder will wipe the nozzle over the last up to 10 mm of tool path after retracting.
Parameters
- Boolean
Example(s)
Boolean
The check box is checked to use the function.
The check box is unchecked to leave the function unused.