Difference between revisions of "SETTINGS/General/Support Material/Support Material/Support Type"

Revision as of 12:55, 20 January 2016

A screenshot of the Support Type setting as seen in MatterControl's SETTINGS pane.

Function

The pattern to draw for the generation of support material.

Parameters

Available as presets only:

• GRID
• LINES

Example(s)

For these examples, Support_test.stl is the model used.

GRID

The GRID support material type, shown here in 3D Layer View at full height before the overhang.

LINES

The LINES support material type, shown here in 3D Layer View at full height before the overhang.