234
edits
Changes
Created page with "<center>The '''Export...''' window. The '''File export options''' dialog box which allows the user to export the model in one..."
[[File:3D_View-Export-window.png|right|framed|<center>The '''Export...''' window.]]
The '''File export options''' dialog box which allows the user to export the model in one of several formats.
=== Export as STL ===
Saves the model(s) currently in 3D View as its own .stl model file.
=== Export as AMF ===
Saves the model(s) currently in 3D View as its own .amf model file.
=== Export as G-Code ===
Slices the model(s) currently in 3D View using the [[Settings|slice settings]] currently selected and saves the output as a .gcode file.
=== [[Export_G-Code_as_X3G|Export as X3G]] ===
Slices the model(s) currently in 3D View using the [[Settings|slice settings]] currently selected and saves the output as a .x3g file.
=== Apply leveling to gcode during export ===
Applies software print leveling to the gcode file during export. Use this, for instance, if your printer needs the software leveling and you will be printing from an SD card.
=== Show file in folder after save ===
[[File:3D_View-Export-Show_file.png]]
Checking this box will cause MatterControl to open the operating system's folder manager to the location in which the outputted file was saved after the export is complete.
[[Category:Features]]
The '''File export options''' dialog box which allows the user to export the model in one of several formats.
=== Export as STL ===
Saves the model(s) currently in 3D View as its own .stl model file.
=== Export as AMF ===
Saves the model(s) currently in 3D View as its own .amf model file.
=== Export as G-Code ===
Slices the model(s) currently in 3D View using the [[Settings|slice settings]] currently selected and saves the output as a .gcode file.
=== [[Export_G-Code_as_X3G|Export as X3G]] ===
Slices the model(s) currently in 3D View using the [[Settings|slice settings]] currently selected and saves the output as a .x3g file.
=== Apply leveling to gcode during export ===
Applies software print leveling to the gcode file during export. Use this, for instance, if your printer needs the software leveling and you will be printing from an SD card.
=== Show file in folder after save ===
[[File:3D_View-Export-Show_file.png]]
Checking this box will cause MatterControl to open the operating system's folder manager to the location in which the outputted file was saved after the export is complete.
[[Category:Features]]
