Difference between revisions of "QUEUE/File export options"
From MatterControl Manual
< QUEUE
| Line 1: | Line 1: | ||
__NOTOC__{{DISPLAYTITLE:File export options}}[[File:File export options.png|right|framed|<center>The '''File export options''' window, shown when the 'Export' button is clicked from the Queue.</center>]]The '''File export options''' window appears when the 'Export' button is clicked from the [[Queue]]. | __NOTOC__{{DISPLAYTITLE:File export options}}[[File:File export options.png|right|framed|<center>The '''File export options''' window, shown when the 'Export' button is clicked from the Queue.</center>]]The '''File export options''' window appears when the 'Export' button is clicked from the [[Queue]]. | ||
| + | |||
| + | == Export as STL == | ||
| + | |||
| + | Simple export of model as .STL file. | ||
| + | |||
| + | == Export as AMF == | ||
| + | |||
| + | Simple export of model as .AMF file. | ||
== Export as G-Code == | == Export as G-Code == | ||
| Line 11: | Line 19: | ||
== Apply leveling to G-Code during export == | == Apply leveling to G-Code during export == | ||
| − | Applies configured [[Options/Software Print Leveling|Software Print Leveling]] to the slice. | + | Applies configured [[Options/Software Print Leveling|Software Print Leveling]] to the slice (if enabled). |
== Show file in folder after save == | == Show file in folder after save == | ||
Opens the folder the model was saved to after export using the operating system's default file management program. | Opens the folder the model was saved to after export using the operating system's default file management program. | ||
Revision as of 15:54, 7 September 2016
Export as STL
Simple export of model as .STL file.
Export as AMF
Simple export of model as .AMF file.
Export as G-Code
Slices the model and exports the G-Code as a .gcode file.
Export as X3G
Slices the model and exports the G-Code as a .x3g file, a file type written with protocol used by some MakerBot printers and clones.
Apply leveling to G-Code during export
Applies configured Software Print Leveling to the slice (if enabled).
Show file in folder after save
Opens the folder the model was saved to after export using the operating system's default file management program.
