Changes

Jump to: navigation, search

SETTINGS/Printer/Print Leveling/Probe Settings/Z Offset

33 bytes removed, 01:34, 7 December 2016
no edit summary
=== Restrictions ===
*This section (Print Recovery) is not Not shown when [[SETTINGS/Printer/Features/Hardware/Has Hardware Leveling|Has Hardware Leveling]] is enabled as only one form of leveling can be used at a time.|*millimeters (mm)|
=== mm ===
In this example, the paper to be used during the manual bed probe is 0.1 mm thick.}}

Navigation menu