Difference between revisions of "SETTINGS/Printer/Print Leveling/Probe Settings/XY Offset"

From MatterControl Manual
Jump to: navigation, search
(Created page with "{{Slice Settings |The distance the Z probe is from the extruder in X and Y.|*millimeters (mm)| }}")
 
Line 1: Line 1:
 
{{Slice Settings
 
{{Slice Settings
  
|The distance the Z probe is from the extruder in X and Y.|*millimeters (mm)|
+
|Coordinates of the Z probe, from the extruder, in X and Y.|*millimeters (mm)|In this example, the probe is 23 millimeters to the right of and exactly at the same depth as the nozzle.}}
 
+
}}
+

Revision as of 14:51, 2 August 2017

A screenshot of the XY Offset setting as seen in MatterControl's SETTINGS pane.

Function

Coordinates of the Z probe, from the extruder, in X and Y.

Parameters

  • millimeters (mm)

Example(s)

In this example, the probe is 23 millimeters to the right of and exactly at the same depth as the nozzle.

XY Offset-ss-ex.png