234
edits
Changes
no edit summary
{{Migrated|slice-settings/speed/speed#initial-layer-speed}}
{{Slice Settings
|The speed at which the nozzle will move when printing the first layer. If expressed as a percentage the Infill speed is modified. This affects the first layer of the print as well as the first layer of the raft, if there is one.|*millimeters per second (mm/s)*percentage percent [of [[Slice Settings/General/Speed/Speed for Infill/Infill|Infillspeed]]] (%) == [[Custom G-Code Variables|Custom G-Code Variable]] == <code>first_layer_speed</code>|
=== mm/s ===
=== % ===
In this example, the first layer will print at 35% percent of the Infill speed (which for this example is set at 40), so the final speed will be 14 mm/s.
[[File:{{SUBPAGENAME}}-ss-ex1.png]]
