Open main menu

Changes

SETTINGS/Filament/Extrusion/Extrusion Width/First Layer

40 bytes added, 01:20, 6 April 2019
no edit summary
{{Migrated|slice-settings/filament/advanced#first-layer}}
{{Slice Settings
|A modifier of the [[Slice Settings/Printer/Extruder/Extruder X/Nozzle Diameter|width of the extrusion]] for the first layer of the print.
A value greater than 100% can help with adhesion to the print bed.|*millimeters (mm)
*percent (%)
Set to 0 to use [[Slice Settings/Printer/Extruder/Extruder X/Nozzle Diameter|default extrusion width]].|
=== mm ===
=== % ===
In this example, the [[Slice Settings/Printer/Extruder/Extruder X/Nozzle Diameter|nozzle diameter set under Printer settings]] will be modified by 110%. For this example, the nozzle size was 0.4 mm, so the adjusted size will be 0.44 mm.
[[File:{{SUBPAGENAME}}-ss-ex1.png]]