Difference between revisions of "SETTINGS/Filament/Extrusion/Extrusion Width/First Layer"

From MatterControl Manual
Jump to: navigation, search
 
(One intermediate revision by one other user not shown)
Line 1: Line 1:
 +
{{Migrated|slice-settings/filament/advanced#first-layer}}
 
{{Slice Settings
 
{{Slice Settings
  

Latest revision as of 17:20, 5 April 2019

Merge

Migrating: For MatterControl 2.0 the MatterControl documentation is moving to matterhackers.com/mattercontrol/support/.
This page is in the process of being migrated. It's new home will be matterhackers.com/mattercontrol/support/slice-settings/filament/advanced#first-layer.

A screenshot of the First Layer setting as seen in MatterControl's SETTINGS pane.

Function

A modifier of the width of the extrusion for the first layer of the print.

A value greater than 100% can help with adhesion to the print bed.

Parameters

  • millimeters (mm)
  • percent (%)

Set to 0 to use default extrusion width.

Example(s)

mm

In this example, the adjusted nozzle diameter for the first layer extrusion will be 0.5 mm.

First Layer-ss-ex.png

%

In this example, the nozzle diameter set under Printer settings will be modified by 110%. For this example, the nozzle size was 0.4 mm, so the adjusted size will be 0.44 mm.

First Layer-ss-ex1.png

Retrieved from "http://wiki.mattercontrol.com/index.php?title=SETTINGS/Filament/Extrusion/Extrusion_Width/First_Layer&oldid=4208"