Difference between revisions of "SETTINGS/Filament/Extrusion/Extrusion Width/Outside Perimeters"
(Created page with "{{Slice Settings |A modifier of the width of the extrusion when printing outside perimeters. Can be useful to...") |
|||
| (5 intermediate revisions by one other user not shown) | |||
| Line 1: | Line 1: | ||
| + | {{Migrated|slice-settings/filament/advanced#outside-perimeters}} | ||
{{Slice Settings | {{Slice Settings | ||
| − | |A modifier of the [[ | + | |A modifier of the [[Settings/Printer/Extruder/Extruder X/Nozzle Diameter|width of the extrusion]] when printing outside perimeters. |
Can be useful to fine-adjust actual print size when objects print larger or smaller than specified in the digital model.|*millimeters (mm) | Can be useful to fine-adjust actual print size when objects print larger or smaller than specified in the digital model.|*millimeters (mm) | ||
*percent (%) | *percent (%) | ||
| − | Set to 0 to use [[ | + | Set to 0 to use [[Settings/Printer/Extruder/Extruder X/Nozzle Diameter|default extrusion width]].| |
=== mm === | === mm === | ||
| − | In this example, the adjusted nozzle diameter for the first layer extrusion will be .3 mm.}} | + | In this example, the adjusted nozzle diameter for the first layer extrusion will be 0.3 mm.}} |
=== % === | === % === | ||
| − | In this example, the [[ | + | In this example, the [[Settings/Printer/Extruder/Extruder X/Nozzle Diameter|nozzle size set under Printer settings]] will be modified by 90%. For this example, the nozzle size was 0.5 mm, so the adjusted size will be 0.45 mm. |
[[File:{{SUBPAGENAME}}-ss-ex1.png]] | [[File:{{SUBPAGENAME}}-ss-ex1.png]] | ||
Latest revision as of 17:25, 5 April 2019
|
|
Migrating: For MatterControl 2.0 the MatterControl documentation is moving to matterhackers.com/mattercontrol/support/. |
Function
A modifier of the width of the extrusion when printing outside perimeters.
Can be useful to fine-adjust actual print size when objects print larger or smaller than specified in the digital model.
Parameters
- millimeters (mm)
- percent (%)
Set to 0 to use default extrusion width.
Example(s)
mm
In this example, the adjusted nozzle diameter for the first layer extrusion will be 0.3 mm.
%
In this example, the nozzle size set under Printer settings will be modified by 90%. For this example, the nozzle size was 0.5 mm, so the adjusted size will be 0.45 mm.
