Difference between revisions of "SETTINGS/General/Layers-Surface/Outer Surface - Top & Bottom/Bottom Solid Layers"

From MatterControl Manual
Jump to: navigation, search
(Created page with "{{Slice Settings |The number of layers, or the distance in millimeters, that will be solid filled on the bottom surface(s) of the object. Add mm to the end of the number to s...")
(No difference)

Revision as of 14:49, 17 December 2015

A screenshot of the Bottom Solid Layers setting as seen in MatterControl's SETTINGS pane.

Function

The number of layers, or the distance in millimeters, that will be solid filled on the bottom surface(s) of the object. Add mm to the end of the number to specify distance in millimeters.

Parameters

Count or mm

Can be zero.

Example(s)

count

The default. Specify a number to indicate the number of layers that will be solid on the bottom surface(s) of the print.

Bottom Solid Layers-ss-ex.png

mm

Specify a number with 'mm' immediately after to indicate the distance in millimeters that will be solid on the bottom surface(s) of the print.

Bottom Solid Layers-ss-ex1.png

Retrieved from "http://wiki.mattercontrol.com/index.php?title=SETTINGS/General/Layers-Surface/Outer_Surface_-_Top_%26_Bottom/Bottom_Solid_Layers&oldid=617"