Difference between revisions of "SETTINGS/General/Infill/Infill/Fill Density"
From MatterControl Manual
(Created page with "{{Slice Settings |The ratio of material to empty space ranged 0 to 1. Zero would be no infill; 1 is solid infill.|Percentage or ratio == Presets == *Light: 10% *Standard: 3...") |
(No difference)
|
Revision as of 14:51, 17 December 2015
Function
The ratio of material to empty space ranged 0 to 1. Zero would be no infill; 1 is solid infill.
Parameters
Percentage or ratio
Presets
- Light: 10%
- Standard: 30%
- Heavy: 90%
- Custom: user-defined (can be % or ratio)
Example(s)
%
Using a percentage. In this case, the infill will be 37% of the total area designated for infill.
Ratio
Using a ratio from 0 to 1. In this case, 0.89 translates to 89%. Actual infill will be 89% of the total area designated for infill.
