Difference between revisions of "SETTINGS/General/Infill/Advanced/Starting Angle"
From MatterControl Manual
(Created page with "{{Slice Settings |Sets the starting angle of the infill. Not used when bridging.|Degrees (radian)| === degrees === This infill is tilted 35 degrees from parallel.}}") |
(No difference)
|
Revision as of 17:29, 17 December 2015
Function
Sets the starting angle of the infill. Not used when bridging.
Parameters
Degrees (radian)
Example(s)
degrees
This infill is tilted 35 degrees from parallel.
