Difference between revisions of "SETTINGS/General/Speed/Speed for Infill/Infill"
From MatterControl Manual
< SETTINGS | General | Speed | Speed for Infill
| Line 1: | Line 1: | ||
{{Slice Settings | {{Slice Settings | ||
| − | |The speed at which infill is printed.|Millimeters per second| | + | |The speed at which infill is printed.|Millimeters per second (mm/s)| |
=== mm/s === | === mm/s === | ||
In the case shown below, the infill will print at 40 mm/s.}} | In the case shown below, the infill will print at 40 mm/s.}} | ||
Revision as of 17:13, 18 December 2015
Function
The speed at which infill is printed.
Parameters
Millimeters per second (mm/s)
Example(s)
mm/s
In the case shown below, the infill will print at 40 mm/s.
