Difference between revisions of "SETTINGS/General/Infill/Infill/Fill Density"
From MatterControl Manual
| Line 1: | Line 1: | ||
{{Slice Settings | {{Slice Settings | ||
| − | |The ratio of material to empty space ranged 0 to 1. Zero would be no infill; 1 is solid infill.| | + | |The ratio of material to empty space ranged 0 to 1. Zero would be no infill; 1 is solid infill.|*percentage (%) |
| + | *ratio | ||
| + | |||
| + | Can be zero. | ||
== Presets == | == Presets == | ||
Revision as of 17:19, 18 December 2015
Function
The ratio of material to empty space ranged 0 to 1. Zero would be no infill; 1 is solid infill.
Parameters
- percentage (%)
- ratio
Can be zero.
Presets
- Light: 10%
- Standard: 30%
- Heavy: 90%
- Custom: user-defined (can be % or ratio). Can be zero.
Example(s)
%
Using a percentage. In this case, the infill will be 37% of the total area designated for infill.
Ratio
Using a ratio from 0 to 1. In this case, 0.89 translates to 89%. Actual infill will be 89% of the total area designated for infill.
