Difference between revisions of "SETTINGS/General/Speed/Speed for Non-Print Moves/Travel"
From MatterControl Manual
< SETTINGS | General | Speed | Speed for Non-Print Moves
(Created page with "{{Slice Settings |Speed at which the nozzle will move when not extruding material.|*millimeters per second (mm/s)| === mm/s === In the example below, the nozzle will travel...") |
(No difference)
|
Revision as of 14:28, 21 December 2015
Function
Speed at which the nozzle will move when not extruding material.
Parameters
- millimeters per second (mm/s)
Example(s)
mm/s
In the example below, the nozzle will travel at 300 mm/s when it is moving across the print and not extruding.
