Difference between revisions of "SETTINGS/General/Support Material/Support Options/Interface Layers"
From MatterControl Manual
< SETTINGS | General | Support Material | Support Options
(Created page with "{{Slice Settings |The number of layers, or the distance, to print between the supports and the part.|*layer count (layers) *millimeters (mm) Can be zero.| === layers === I...") |
(No difference)
|
Revision as of 12:42, 22 December 2015
Function
The number of layers, or the distance, to print between the supports and the part.
Parameters
- layer count (layers)
- millimeters (mm)
Can be zero.
Example(s)
layers
In this example, three interface layers will be drawn above the support material and below the model.
mm
In this example, 2 mm of interface layers will be drawn above the support material and below the model.
