Changes

Jump to: navigation, search

SETTINGS/General/Support Material/Support Options/Air Gap

784 bytes added, 21:18, 22 December 2015
Created page with "{{Slice Settings |The number of layers, or the distance, to skip between the support (including Slice Settings/General/Support Material/Support Options/Interface Layers|int..."
{{Slice Settings

|The number of layers, or the distance, to skip between the support (including [[Slice Settings/General/Support Material/Support Options/Interface Layers|interface layers]]) and the model. Add mm to the end of the number to specify distance.|*layer count (layers)
*millimeters (mm)

Can be zero.|

For these examples, [http://104.154.32.252/images/7/72/Support_test.stl Support_test.stl] is the model used.

=== layers ===

In this example, the distance between the top of the support material and the bottom of the model is three layers (which for this model the layer height is 0.2 mm), so 0.6 mm total.}}

=== mm ===

In this example, the distance between the top of the support material and the bottom of the model is 0.2 mm.

[[File:{{SUBPAGENAME}}-ss-ex1.png]]

Navigation menu