Open main menu

Difference between revisions of "SETTINGS/Filament/Retraction/While Printing/Wipe After Retract"

< SETTINGS‎ | Filament‎ | Retraction‎ | While Printing
(Created page with "{{Slice Settings |The extruder will wipe the nozzle over the last up to 10 mm of tool path after retracting.|*Boolean| === Boolean === The check box is checked to use the f...")
 
 
(7 intermediate revisions by one other user not shown)
Line 1: Line 1:
 +
{{Outdated|This setting is no longer available in MatterControl 2.0.}}
 +
 
{{Slice Settings
 
{{Slice Settings
  

Latest revision as of 17:10, 16 May 2019

Outdated

Outdated: This setting is no longer available in MatterControl 2.0.
This page contains outdated information and is kept only for historical reasons.
For up to date information on MatterControl 2.0, visit the new MatterControl documentation.

A screenshot of the Wipe After Retract setting as seen in MatterControl's SETTINGS pane.

Function

The extruder will wipe the nozzle over the last up to 10 mm of tool path after retracting.

Parameters

  • Boolean

Example(s)

Boolean

The check box is checked to use the function.

Wipe After Retract-ss-ex.png

The check box is unchecked to leave the function unused.

Wipe After Retract-ss-ex1.png

Last modified on 16 May 2019, at 17:10