Difference between revisions of "SETTINGS/Filament/Temperatures/Extruder Temperatures/Extruder Temperature"
From MatterControl Manual
< SETTINGS | Filament | Temperatures | Extruder Temperatures
(Created page with "{{Slice Settings |The target temperature the extruder will attempt to reach during the print. This temperature can be adjusted during a print by changing the value in the [...") |
|||
| Line 3: | Line 3: | ||
|The target temperature the extruder will attempt to reach during the print. | |The target temperature the extruder will attempt to reach during the print. | ||
| − | This temperature can be adjusted during a print by changing the value in the [[Controls/Temperature/Extruder Temperature|Extruder Temperature Target field]].|*degrees Celsius| | + | This temperature can be adjusted during a print by changing the value in the [[Controls/Temperature/Extruder Temperature|Extruder Temperature Target field]].|*degrees Celsius |
| + | |||
| + | == [[Custom GCode Variables|Custom GCode Variable]] == | ||
| + | |||
| + | <code>temperature</code>| | ||
=== degrees === | === degrees === | ||
In this example, the extruder will attempt to reach 218 for the duration of the print.}} | In this example, the extruder will attempt to reach 218 for the duration of the print.}} | ||
Revision as of 10:33, 13 January 2016
Function
The target temperature the extruder will attempt to reach during the print.
This temperature can be adjusted during a print by changing the value in the Extruder Temperature Target field.
Parameters
- degrees Celsius
Custom GCode Variable
temperature
Example(s)
degrees
In this example, the extruder will attempt to reach 218 for the duration of the print.
