Difference between revisions of "SETTINGS/Filament/Temperatures/Extruder Temperatures/Extruder Wipe Temperature"

Revision as of 17:31, 29 December 2015

A screenshot of the Extruder Wipe Temperature setting as seen in MatterControl's SETTINGS pane.

The temperature at which the extruder will wipe the nozzle, as specified in Custom G-Code.

Used only by Custom G-Code fields as a Custom GCode variable.

extruder_wipe_temperature

In this example, the nozzle will heat to 145 degrees as specified in the Start GCode field, assuming the variable is used.

@@ Line 1: / Line 1: @@
 {{Slice Settings
-|The temperature at which the extruder will wipe the nozzle.
+|The temperature at which the extruder will wipe the nozzle, as specified in Custom G-Code.
-Only used in Custom G-Code fields as a [[Custom GCode Variables|Custom GCode variable]].|*parameters text
+Used only by Custom G-Code fields as a [[Custom GCode Variables|Custom GCode variable]].|*degrees Celsius
 == [[Custom GCode Variables|Custom GCode Variable]] ==
-<code>variable</code>|
+<code>extruder_wipe_temperature</code>|
-=== Parameter 1 ===
+=== degrees ===
+In this example, the nozzle will heat to 145 degrees as specified in the [[Slice Settings/Printer/Custom G-Code/Start G-Code|Start GCode]] field, assuming the variable is used.}}
-Caption for Example for Parameter 1.}}
-=== Parameter 2 ===
-Caption for example for Parameter 2.
-[[File:{{SUBPAGENAME}}-ss-ex1.png]]