Difference between revisions of "SETTINGS/Filament/Retraction/While Printing/Z Lift"
From MatterControl Manual
< SETTINGS | Filament | Retraction | While Printing
(Created page with "{{Slice Settings |The distance the nozzle will lift after each retraction.|*millimeters (mm)| === mm === In this example, the nozzle will lift 0.3 mm after every retraction.}}") |
|||
| Line 1: | Line 1: | ||
{{Slice Settings | {{Slice Settings | ||
| − | |The distance the nozzle will lift after each retraction.|*millimeters (mm)| | + | |The distance the nozzle will lift after each retraction.|*millimeters (mm) |
| + | |||
| + | Can be zero.| | ||
=== mm === | === mm === | ||
In this example, the nozzle will lift 0.3 mm after every retraction.}} | In this example, the nozzle will lift 0.3 mm after every retraction.}} | ||
Revision as of 14:32, 30 December 2015
Function
The distance the nozzle will lift after each retraction.
Parameters
- millimeters (mm)
Can be zero.
Example(s)
mm
In this example, the nozzle will lift 0.3 mm after every retraction.
