Difference between revisions of "SETTINGS/General/Speed/Speed for Non-Print Moves/Travel"
From MatterControl Manual
< SETTINGS | General | Speed | Speed for Non-Print Moves
| Line 1: | Line 1: | ||
{{Slice Settings | {{Slice Settings | ||
| − | |The speed at which the nozzle will move when not extruding material.|*millimeters per second (mm/s)| | + | |The speed at which the nozzle will move when not extruding material.|*millimeters per second (mm/s) |
| + | |||
| + | == [[Custom GCode Variables|Custom GCode Variable]] == | ||
| + | |||
| + | <code>travel_speed</code>| | ||
=== mm/s === | === mm/s === | ||
Revision as of 10:43, 13 January 2016
Function
The speed at which the nozzle will move when not extruding material.
Parameters
- millimeters per second (mm/s)
Custom GCode Variable
travel_speed
Example(s)
mm/s
In the example below, the nozzle will travel at 300 mm/s when it is moving across the print and not extruding.
