Difference between revisions of "SETTINGS/General/Speed/Speed for Non-Print Moves/Travel"
From MatterControl Manual
< SETTINGS | General | Speed | Speed for Non-Print Moves
| Line 3: | Line 3: | ||
|The speed at which the nozzle will move when not extruding material.|*millimeters per second (mm/s) | |The speed at which the nozzle will move when not extruding material.|*millimeters per second (mm/s) | ||
| − | == [[Custom | + | == [[Custom G-Code Variables|Custom G-Code Variable]] == |
<code>travel_speed</code>| | <code>travel_speed</code>| | ||
Revision as of 11:59, 13 January 2016
Function
The speed at which the nozzle will move when not extruding material.
Parameters
- millimeters per second (mm/s)
Custom G-Code Variable
travel_speed
Example(s)
mm/s
In the example below, the nozzle will travel at 300 mm/s when it is moving across the print and not extruding.
