Difference between revisions of "SETTINGS/Printer/Print Leveling/Probe Settings/Z Offset"
From MatterControl Manual
< SETTINGS | Printer | Print Leveling | Probe Settings
(Created page with "{{Slice Settings |The thickness of the paper (or other calibration device) used to perform manual bed probe.|*millimeters (mm)| === mm === In this example, the paper to be...") |
m (MatterHackers moved page Slice Settings/Printer/Print Leveling/Probe Settings/Manual Probe Paper Width to Settings/Printer/Print Leveling/Probe Settings/Manual Probe Paper Width without leaving a redirect) |
(No difference)
| |
Revision as of 12:56, 20 January 2016
Function
The thickness of the paper (or other calibration device) used to perform manual bed probe.
Parameters
- millimeters (mm)
Example(s)
mm
In this example, the paper to be used during the manual bed probe is 0.1 mm thick.
