Difference between revisions of "SETTINGS/Filament/Temperatures/Extruder Temperatures/Extruder Wipe Temperature"

Revision as of 12:00, 13 January 2016

A screenshot of the Extruder Wipe Temperature setting as seen in MatterControl's SETTINGS pane.

The temperature at which the extruder will wipe the nozzle, as specified in Custom G-Code.

Used only by Custom G-Code fields as a Custom G-Code variable.

extruder_wipe_temperature

In this example, the nozzle will heat to 145 degrees as specified in the Start G-Code field, assuming the variable is used.

@@ Line 3: / Line 3: @@
 |The temperature at which the extruder will wipe the nozzle, as specified in Custom G-Code.
-Used only by Custom G-Code fields as a [[Custom GCode Variables|Custom GCode variable]].|*degrees Celsius
+Used only by Custom G-Code fields as a [[Custom G-Code Variables|Custom G-Code variable]].|*degrees Celsius
 == [[Custom G-Code Variables|Custom G-Code Variable]] ==
@@ Line 10: / Line 10: @@
 === degrees ===
-In this example, the nozzle will heat to 145 degrees as specified in the [[Slice Settings/Printer/Custom G-Code/Start G-Code|Start GCode]] field, assuming the variable is used.}}
+In this example, the nozzle will heat to 145 degrees as specified in the [[Slice Settings/Printer/Custom G-Code/Start G-Code|Start G-Code]] field, assuming the variable is used.}}