Difference between revisions of "CONTROLS"

From MatterControl Manual
Jump to: navigation, search
Line 1: Line 1:
__NOTOC__[[File:Controls-ss.png|framed|right|<center>The 'Controls' pane as seen in MatterControl desktop.</center>]]
+
__NOTOC__{{SCO}}
 +
<br>
 +
[[File:Controls-ss.png|framed|right|<center>The 'Controls' pane as seen in MatterControl desktop.</center>]]
 
The Controls pane is where available manual controls can be used and adjustments can be made during prints.
 
The Controls pane is where available manual controls can be used and adjustments can be made during prints.
  

Revision as of 12:32, 18 January 2016

Navigation
SETTINGSCONTROLSOPTIONSSCO-icon.png


The 'Controls' pane as seen in MatterControl desktop.

The Controls pane is where available manual controls can be used and adjustments can be made during prints.

To access the Controls menu from the MatterControl main screen, click Settings Controls.png --> Controls.png

Temperature

Temperature Controls for the extruder(s) and heated bed (if present).

Movement

Manual movement controls for the nozzle and extruder(s). X, Y, and Z movement controls switch to fine adjustment during prints.

Fan

Manual control of layer-cooling fan speed.

Macros

The Macros section is for saving snippets of G-Code as easy-to-use buttons. The image on the right has a few examples, blurred as they may be since those particular buttons are not included with MatterControl by default.

Tuning Adjustment

Allows for manual adjustment of speed and extrusion during a print.