Difference between revisions of "SETTINGS/General/Raft-Priming/Raft/Air Gap"
From MatterControl Manual
< SETTINGS | General | Raft-Priming | Raft
m (MatterHackers moved page Slice Settings/General/Skirt and Raft/Raft/Air Gap to Settings/General/Skirt and Raft/Raft/Air Gap without leaving a redirect) |
|||
| Line 1: | Line 1: | ||
{{Slice Settings | {{Slice Settings | ||
| − | |The distance between the first layer and the top of the raft. A good value is typically about half the [[ | + | |The distance between the first layer and the top of the raft. A good value is typically about half the [[Settings/Printer/Extruder/Extruder X/Nozzle Diameter|extrusion diameter]]. For a 0.4 mm nozzle, a value between 0.0 and 0.2 would be best.|*millimeters (mm)| |
=== mm === | === mm === | ||
In this example, a 0.2 mm gap will be left between the raft and the first layer.}} | In this example, a 0.2 mm gap will be left between the raft and the first layer.}} | ||
Revision as of 13:15, 20 January 2016
Function
The distance between the first layer and the top of the raft. A good value is typically about half the extrusion diameter. For a 0.4 mm nozzle, a value between 0.0 and 0.2 would be best.
Parameters
- millimeters (mm)
Example(s)
mm
In this example, a 0.2 mm gap will be left between the raft and the first layer.
