Difference between revisions of "SETTINGS/Filament/Retraction/While Printing/Wipe After Retract"

From MatterControl Manual
Jump to: navigation, search
(No difference)

Revision as of 17:55, 14 November 2016

Outdated

Outdated: This page is no longer an accurate representation of the current version of MatterControl and needs to be updated.
This page contains outdated information and is kept only for historical reasons.
For up to date information on MatterControl 2.0, visit the new MatterControl documentation.

A screenshot of the Wipe After Retract setting as seen in MatterControl's SETTINGS pane.

Function

The extruder will wipe the nozzle over the last up to 10 mm of tool path after retracting.

Parameters

  • Boolean

Example(s)

Boolean

The check box is checked to use the function.

Wipe After Retract-ss-ex.png

The check box is unchecked to leave the function unused.

Wipe After Retract-ss-ex1.png

Retrieved from "http://wiki.mattercontrol.com/index.php?title=SETTINGS/Filament/Retraction/While_Printing/Wipe_After_Retract&oldid=2769"