Difference between revisions of "QUEUE/File export options"

Revision as of 09:53, 1 April 2016 (view source) MatterHackers (Talk | contribs) (Created page with "__NOTOC__<center>The '''File export options''' window, shown when the 'Export' button is clicked from the Queue.</center>The '''F...")	Revision as of 09:55, 1 April 2016 (view source) MatterHackers (Talk | contribs) m (MatterHackers moved page File export options to Queue/File export options without leaving a redirect) Newer edit →
(No difference)

---

Revision as of 09:55, 1 April 2016

The File export options window appears when the 'Export' button is clicked from the Queue.

Export as G-Code

Slices the model and exports the G-Code as a .gcode file.

Export as X3G

Slices the model and exports the G-Code as a .x3g file, a file type written with protocol used by some MakerBot printers and clones.

Apply leveling to G-Code during export

Applies configured Software Print Leveling to the slice.

Show file in folder after save

Opens the folder the model was saved to after export using the operating system's default file management program.