Difference between revisions of "History"

Revision as of 11:57, 11 July 2016 (view source) MatterHackers (Talk | contribs) ← Older edit		Revision as of 11:59, 11 July 2016 (view source) MatterHackers (Talk | contribs) Newer edit →
Line 22:		Line 22:
	See also: [[Options/Clear Print History|Clear Print History]]		See also: [[Options/Clear Print History|Clear Print History]]
		+	<br clear=all>
	== Menu item options ==		== Menu item options ==

---

Revision as of 11:59, 11 July 2016

The History pane displays a log of print sessions the printer has attempted and completed.

Completed Prints

The number of prints completed by MatterControl since the program was installed, the print history was cleared, or the database was cleared.

Total Print Time

The amount of time the printer has been actively printing since the program was installed, the print history was cleared, or the database was cleared.

Only Show Completed

Toggles the display of only completed print sessions. Cancelled or otherwise failed sessions are not shown.

Show Timestamp

Toggles the display of start and end times in the log.

Clear Print History

To clear the log, navigate to the Options menu and use the button in the Clear Print History section.

See also: Clear Print History

Menu item options

View

Clicking the View button next to a past print will open the generated G-Code file in Layer View.

Print

Clicking the Print button next to a past print will send the G-Code to the printer and start the print.