Difference between revisions of "SETTINGS/Printer/Features/Behavior/Z Can Be Negative"

From MatterControl Manual
Jump to: navigation, search
(Blanked the page)
m (Reverted edits by Tanderson (talk) to last revision by MatterHackers)
Line 1: Line 1:
 +
{{Slice Settings
  
 +
|Allows the printer to attempt going below 0 along the Z axis during the [[Options/Software Print Leveling|Software Print Leveling]] wizard, and disables related warnings. Does not override actual endstops, physical or software.
 +
 +
=== Restrictions ===
 +
 +
*Not shown if [[SETTINGS/Printer/Features/Hardware/Has Hardware Leveling|Has Hardware Leveling]] is enabled as negative Z values can interfere with leveling processes.|*Boolean|
 +
 +
=== Boolean ===
 +
 +
The check box is checked to use the function.}}
 +
 +
The check box is unchecked to leave the function unused.
 +
 +
[[File:{{SUBPAGENAME}}-ss-ex1.png]]

Revision as of 17:46, 31 July 2017

A screenshot of the Z Can Be Negative setting as seen in MatterControl's SETTINGS pane.

Function

Allows the printer to attempt going below 0 along the Z axis during the Software Print Leveling wizard, and disables related warnings. Does not override actual endstops, physical or software.

Restrictions

  • Not shown if Has Hardware Leveling is enabled as negative Z values can interfere with leveling processes.

Parameters

  • Boolean

Example(s)

Boolean

The check box is checked to use the function.

Allow Negative Z-ss-ex.png

The check box is unchecked to leave the function unused.

Allow Negative Z-ss-ex1.png