Difference between revisions of "SETTINGS/General/Speed/Speed for Perimeters/Outside Perimeter"
From MatterControl Manual
< SETTINGS | General | Speed | Speed for Perimeters
| Line 1: | Line 1: | ||
{{Slice Settings | {{Slice Settings | ||
| − | |The speed at which outside, external, or the otherwise visible perimeters will be printed.| | + | |The speed at which outside, external, or the otherwise visible perimeters will be printed.|*millimeters per second (mm/s) |
| + | *percentage [of [[Slice_Settings/General/Speed/Speed_for_Perimeters/Inside_Perimeters|inside perimeters]]] (%).| | ||
=== mm/s === | === mm/s === | ||
Revision as of 17:38, 18 December 2015
Function
The speed at which outside, external, or the otherwise visible perimeters will be printed.
Parameters
- millimeters per second (mm/s)
- percentage [of inside perimeters] (%).
Example(s)
mm/s
In this example, the outside perimeters will print at 25 mm/s.
%
In this example, the outside perimeters will print at 60% of the Inside Perimeters speed (which if you can make out the blurred text is set at 40), so the final result will be 24 mm/s.
