Difference between revisions of "SETTINGS/General/Speed"

From MatterControl Manual
Jump to: navigation, search
Line 3: Line 3:
 
== Sub-sections ==
 
== Sub-sections ==
  
=== Speed for Infill ===
+
=== [[Slice_Settings/General/Speed/Speed_for_Infill|Speed for Infill]] ===
  
 
<splist parent = Slice_Settings/General/Speed/Speed_for_Infill />
 
<splist parent = Slice_Settings/General/Speed/Speed_for_Infill />
  
=== Speed for Perimeters ===
+
=== [[Slice_Settings/General/Speed/Speed_for_Perimeters|Speed for Perimeters]] ===
  
 
<splist parent = Slice_Settings/General/Speed/Speed_for_Perimeters />
 
<splist parent = Slice_Settings/General/Speed/Speed_for_Perimeters />
  
=== Speed for Other Printing ===
+
=== [[Slice_Settings/General/Speed/Speed_for_Other_Printing|Speed for Other Printing]] ===
  
 
<splist parent = Slice_Settings/General/Speed/Speed_for_Other_Printing />
 
<splist parent = Slice_Settings/General/Speed/Speed_for_Other_Printing />
  
=== Speed for Non-Print Moves ===
+
=== [[Slice_Settings/General/Speed/Speed_for_Non-Print_Moves|Speed for Non-Print Moves]] ===
  
 
<splist parent = Slice_Settings/General/Speed/Speed_for_Non-Print_Moves />
 
<splist parent = Slice_Settings/General/Speed/Speed_for_Non-Print_Moves />
  
=== Modifiers ===
+
=== [[Slice_Settings/General/Speed/Modifiers|Modifiers]] ===
  
 
<splist parent = Slice_Settings/General/Speed/Modifiers />
 
<splist parent = Slice_Settings/General/Speed/Modifiers />

Revision as of 17:36, 23 December 2015

The Speed sub-category as shown in the MatterControl SETTINGS pane.

Speed is a sub-category of General settings which deal with the speed at which specific sections of the model will print.

Sub-sections

Speed for Infill

Speed for Perimeters

Speed for Other Printing

Speed for Non-Print Moves

Modifiers

Slice_Settings/General/Speed/Modifiers has no subpages to list.